A method of solving sets of nonlinear algebraic equations Progress report

Methods for solving nonlinear algebraic equations in computer programs for nuclear magnetic resonance spectroscop

Inverter-Based Low-Voltage CCII- Design and Its Filter Application

This paper presents a negative type second-generation current conveyor (CCII-). It is based on an inverter-based low-voltage error amplifier, and a negative current mirror. The CCII- could be operated in a very low supply voltage such as ±0.5V. The proposed CCII- has wide input voltage range (±0.24V), wide output voltage (±0.24V) and wide output current range (±24mA). The proposed CCII- has no on-chip capacitors, so it can be designed with standard CMOS digital processes. Moreover, the architecture of the proposed circuit without cascoded MOSFET transistors is easily designed and suitable for low-voltage operation. The proposed CCII- has been fabricated in TSMC 0.18μm CMOS processes and it occupies 1189.91 x 1178.43μm2 (include PADs). It can also be validated by low voltage CCII filters

Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results

[Abstract]: This paper compares the thermal analysis of two types of random glass fibre reinforced thermoplastic matrix composites joined by adhesives using microwave energy. Fixed frequency, 2.45 GHz, microwave facility is used to join thirty three percent by weight random glass fibre reinforced polystyrene composite [PS/GF (33%)] and thirty three percent by weight random glass fibre reinforced low density polyethylene composite [LDPE/GF (33%)]. The facility used is shown in Figure 1. With a given power level, the composites were exposed to various exposure times to microwave irradiation. The primer or coupling agent used was 5-minute two-part adhesive. The heat distribution of the samples of the two types of composites was analysed and compared. The relationship between the heat distribution and the lap shear strength of the samples was also compared and discussed

Anomalous physical properties of underdoped weak-ferromagnetic superconductor RuSr2_2EuCu2_{2}O8_{8}

Similar to the optimal-doped, weak-ferromagnetic (WFM induced by canted antiferromagnetism, T$_{Curie}$ = 131 K) and superconducting (T$_{c}$ = 56 K) RuSr$_{2}$GdCu$_{2}$O$_{8}$, the underdoped RuSr$_{2}$EuCu$_{2}$O$_{8}$ (T$_{Curie}$ = 133 K, T$_{c}$ = 36 K) also exhibited a spontaneous vortex state (SVS) between 16 K and 36 K. The low field ($\pm$20 G) superconducting hysteresis loop indicates a weak and narrow Meissner state region of average lower critical field B$_{c1}^{ave}$(T) = B$_{c1}^{ave}$(0)[1 - (T/T$_{SVS}$)$^{2}$], with B$_{c1}^{ave}$(0) = 7 G and T$_{SVS}$ = 16 K. The vortex melting transition (T$_{melting}$ = 21 K) below T$_{c}$ obtained from the broad resistivity drop and the onset of diamagnetic signal indicates a vortex liquid region due to the coexistence and interplay between superconductivity and WFM order. No visible jump in specific heat was observed near T$_{c}$ for Eu- and Gd-compound. This is not surprising, since the electronic specific heat is easily overshadowed by the large phonon and weak-ferromagnetic contributions. Furthermore, a broad resistivity transition due to low vortex melting temperature would also lead to a correspondingly reduced height of any specific heat jump. Finally, with the baseline from the nonmagnetic Eu-compound, specific heat data analysis confirms the magnetic entropy associated with antiferromagnetic ordering of Gd$^{3+}$ (J = S = 7/2) at 2.5 K to be close to $\it{N_{A}k}$ ln8 as expected.Comment: 7 figure

Anisotropic superconducting properties of aligned Sm0.95_{0.95}La0.05_{0.05}FeAsO0.85_{0.85}F0.15_{0.15} microcrystalline powder

The Sm$_{0.95}$La$_{0.05}$FeAsO$_{0.85}$F$_{0.15}$ compound is a quasi-2D layered superconductor with a superconducting transition temperature T$_c$ = 52 K. Due to the Fe spin-orbital related anisotropic exchange coupling (antiferromagnetic or ferromagnetic fluctuation), the tetragonal microcrystalline powder can be aligned at room temperature using the field-rotation method where the tetragonal $\it{ab}$-plane is parallel to the aligned magnetic field B$_{a}$ and $\it{c}$-axis along the rotation axis. Anisotropic superconducting properties with anisotropic diamagnetic ratio $\chi_{c}/\chi_{ab}\sim$ 2.4 + 0.6 was observed from low field susceptibility $\chi$(T) and magnetization M(B$_{a}$). The anisotropic low-field phase diagram with the variation of lower critical field gives a zero-temperature penetration depth $\lambda_{c}$(0) = 280 nm and $\lambda_{ab}$(0) = 120 nm. The magnetic fluctuation used for powder alignment at 300 K may be related with the pairing mechanism of superconductivity at lower temperature.Comment: 4 pages, 6 figure

Progress of Fintech Industry from Venture Capital Point of View

Fintech (financial technology) is a term that broadly described the innovation of financial product and service using IT technology. Fintech uses a lot of new business model such as FXP2P and supply chain finance, and new technology such as blockchain and cryptocurrency. According to World Economic Forum report, fintech bring disruptive innovations that are reshaping the way financial services. Also, in World Economic Forum report have structured research framework against six (6) function of financial services and eleven (11) clusters of innovation. CrunchBase is a web 2.0 wiki-liked database for startup company that includes the information for founders, key team members, basic financial information, and venture capital funding and important events. This paper uses Python to web scrape CrunchBase website for studying the progress of Fintech industry and find out the development of IT technology and innovation. The objectives of this paper are to study the CrunchBase database to compare with World Economic Forum report research framework and find out the actual progress of Fintech industry